![]() Follow the prompts from the Fuzion software to complete the configuration of your FuzeDriveSSD. Once Windows is fully restored, use Windows update to update the system to the latest drivers and the FuzeDriveSSD will automatically be installed. If using the PC OEM recovery, the steps may be custom to that vendor, so simply follow their standard instructions for reinstalling the OS to the FuzeDriveSSD. Save and exit the BIOS, and make sure you boot from the recovery USB key. After making this change, you will likely need to start Windows in Safe Mode once (), then reboot. The setting is under SATA settings – there will be no NVMe settings for this condition. Enter the BIOS using the F2 (or DEL) key, or as documented in your user guide, find the storage controller settings, and switch from SATA RAID /RST/Optane mode to AHCI mode. Reboot the notebook with the USB drive installed. If required, download and create your OEM recovery USB drive or use the standard Windows Media Creator tool to create a Windows installer. Backup any important data to a separate drive or cloud drive. You may need to backup important data first, then switch the BIOS mode and reinstall Windows from your Dell recovery image (available online in most cases) directly to the FuzeDrive SSD. IMPORTANT: Switching to AHCI mode will cause your system to no longer boot the operating system. This is typically accessed by rebooting your notebook and holding down the F2 function key. Please see the help from Dell support on your specific notebook on how to change to AHCI mode. The notebook must be switched in the system BIOS to AHCI mode. ![]() The presence of an Intel RST SATA-NVME combo driver under Device Manager in Windows and no standalone NVMe driver is the typical indicator of this condition. Unfortunately, some PC OEMs use this as their standard NVMe mode for non-Intel NVMe devices also. Remapping is a technique used by specific Intel only systems to re-route the NVMe through the built in AHCI/SATA interface logic and only works with specific Intel Optane configurations. This is common in most newer Dell notebooks for example, whereas other vendors such as HP notebooks may only use this mode if they detect a specific Intel SSD (e.g. You have reached this web page as we have detected that your system is currently configured in Intel RST mode and is using the Intel proprietary NVMe remapping mode. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |